Altelix NP171406RA1C Red NEMA Weatherproof Enclosure with 120VAC Power and Aluminum Equipment Mounting Plate is ideal for protecting equipment from harsh environments and tampering. This enclosure NEMA Type 3, 3X, IP55 rated and features a fully gasketed door to protect from dust and water ingress. The front and sides of this enclosure are RF transparent, making it ideal for wireless equipment.
PC+ABS Polycarbonate / ABS Blend for Extreme Durability
These enclosures are molded out of Red UV resistant PC+ABS, a high tech thermoplastic blend of polycarbonate and ABS which combines the best qualities of both into a single material. PC+ABS enclosures are superior to ABS enclosures because they maintain high toughness, durability and dimensional stability even at extreme cold and hot temperatures.
The fully gasketed door features reinforced hinges, dual latches and a removable tamper-proof locking screw with key to secure the enclosure if desired. There is also a provision for padlock use. Internal and external electrical ground points are also provided.
The red color of the NP171406RA1C makes it ideal for deploying emergency and life safety equipment as well as industrial automation controllers due to the high visibility of this enclosure.
This configuration consists of the Red PC+ABS NEMA enclosure with hinged lid and a 2.0mm thick aluminum plate with two 120VAC power outlets. A 5 foot pre-wired power cord is included to power the enclosure, so no
additional wiring is required. The encosure can also be hard wired by an
electrician or qualified installer. An external ground lug is provided.
Knock-outs are provided on the enclosure for additional wiring. Cable
grommets are included with the accessory kit.
Aluminum Equipment Mounting Plate
The enclosure and plate can be drilled and modified by the installer to suit unique site requirements.
The enclosure can be wall mounted using the included wall anchors. An optional pole mount kit (NMK-0001) is also available for installation on poles up to 8 inches in diameter.
We offer numerous standard models and options including equipment mounting plates, DIN rails, AC or DC power, air vents, cooling fans and heaters and more. We also offer full customization, engineering and on-site CNC machining of enclosures and associated equipment, all with quick turnaround time. Please contact us with your unique requirements.