- ABS + Polycarbonate Enclosure
- Gasketed Lid with Tamper-Proof Locking Screw
- 3.5" Vents with Rain Shields to Expel Heat
- Dual Door Latches
- Includes Aluminum Reader Mounting Plate
- Optional CAT5 PoE Lightning and Surge Protector Available
- NEMA Type 3R, 3RX / IP24 Rated
- Includes (4) RP-TNC Cable Assemblies, Wall Mount Hardware and Cable Grommets
- Impinj® Speedway® R420 RFID Reader
- Motorola® FX7400 RFID Reader
- Zebra® FX7500 RFID Reader
- Indoor / Outdoor Installations
- Protection of Equipment from Theft or Damage
- Concealment of Electronic Equipment
Altelix NP141105V-RR01 Polycarbonate + ABS Vented NEMA Weatherproof Enclosure is ideal for protecting RFID reader equipment from harsh environments and tampering.
Impinj® Speedway®, Motorola® FX7400 and Zebra® FX7500 RFID Reader Ready
The NP141105V-RR01 is designed specifically for use with the Impinj® Speedway® R420, Motorola® FX7400 and Zebra® FX7500 RFID reader. Mounting holes provided in the equipment mounting plate allow the reader to be securely mounted in the enclosure.
Included with the enclosure are (4) pre-wired RP-TNC Male to RP-TNC Female Bulkhead low loss cable assemblies. These allow antennas to be attached directly to the outside of the enclosure. An optional Ethernet lightning protector is also available.
PC+ABS Polycarbonate / ABS Blend for Extreme Durability
These enclosures are molded out of UV resistant PC+ABS, a high tech thermoplastic blend of polycarbonate and ABS which combines the best qualities of both into a single material. PC+ABS enclosures are superior to ABS enclosures because they maintain high toughness, durability and dimensional stability even at extreme cold and hot temperatures.
This enclosure features a fully gasketed door to protect from dust and water ingress. The door features reinforced hinges, dual latches and a tamper-proof locking screw with key to secure the enclosure. There is also a provision for padlock use. Internal and external electrical ground points are also provided.
This enclosure features two 3.5 inch air vents. Rain shields help prevent rain water from entering the enclosure.
The enclosure can be wall mounted using the included wall anchors. An optional pole mount kit (NMK-0002) is also available for installation on poles up to 8 inches in diameter.
In addition to this standard model, custom options are available such a thermostat controlled cooling fan. Custom color options are also available which include black, red, yellow, green and tan. We also offer full customization, engineering and on-site CNC machining of enclosures and associated equipment, all with quick turnaround time. Please contact us with your unique requirements.
Impinj® and Speedway® are trademarks and/or registered trademarks of Impinj, Inc. Zebra® is a trademark and/or registered trademark of ZIH Corporation. Motorola® is a trademark and/or registered trademark of Motorola Solutions, Inc.